Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Get A Free Estimate

What're your ideas regarding Simple ways to Install a Shower Cubicle on Your Own?

A successful shower installation requires mindful preparation and also a great deal of job. For the most part, you will certainly need to do three types of tasks: mounting wall surfaces, mounting the plumbing, as well as completing walls.

Different Types of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower device can be linked to the bath tap as per your need, and also the water temperature level can be readjusted by means of the taps. Push-on mixers are cheap and extremely simple to mount. Nevertheless, although the hose pipe connection is simple, it is quickly removed. Additionally, it is bothersome to change the temperature.

Bath/Shower Mixer: The pipe and also spray of this kind of shower are combined with a bathroom mixer tap, and also the temperature can be readjusted with the bath faucets. It is a very cheap choice and no extra plumbing is entailed. Nevertheless, the bath/shower mixers also deal with troublesome temperature control alternatives.

Handbook Mixer: The hose and also spray of a hands-on mixer shower unit belong of the wall surface system and also the cold and hot water supplies are attached to a single shutoff The temperature and stress of the water are controlled via either one or a variety of handles (in much more pricey showers). Although temperature control is a lot easier in hands-on mixer kinds, they are much more pricey than the formerly pointed out mixers. They also need additional plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The hose as well as spray of this shower type are a part of the wall surface system and also the hot and cold water products are connected to a solitary valve right here also. It is total with an integrated stabiliser to self-adjust the water temperature as well as to prevent it from ending up being also hot. Among the biggest advantages of a thermostatic mixer shower kind includes practical temperature level control. Nevertheless, it is one of the most expensive of the different mixer alternatives.

Power Shower: A power shower is a single system having a powerful electrical pump that can altering both the water pressure and also temperature. This kind of shower can be fitted if there is water from a cold water cistern as well as a warm water cyndrical tube. A power shower makes the adjustment of both pressure and also temperature easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is supplied by a combination central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply as well as it warms the water electrically. It is necessary to note that for this shower type to be set up, the keys stress needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system permits the temperature level and pressure to be changed by means of a handle. Versions with temperature level stabilisers are better as they remain unaffected by various other faucets in other places in operation within the household. A major drawback of electrical showers is that the control handle just permits the option of high temperatures at less pressure, or lower temperatures at a greater pressure. This is problematic in the winter season when the spray is commonly weak and also the keys water is cooler. Nonetheless, this trouble is taken on in some versions which are readily available with a winter/summer setup.

The Majority Of Usual Errors

Breaching or disregarding regional code restrictions.

Using pipelines that are also little.

Connecting copper to galvanized without utilizing a brass or dielectric fitting in between both.

Not utilizing tape or pipe substance at threaded joints.

Uneven your fixtures when installing them.

Not installing an air void filling up for fixtures.

Cutting supply stub outs also brief to install the shutoff valves onto after the finished wall surface remains in location.

Not correctly lining up tubing into installations or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will certainly create a leakage.).

When transforming the water back on in your house, always run the outdoors tube shutoff or flush your bathrooms to bleed dirt and also air from the lines. This particles can trigger problems in your sink faucets as well as other plumbing trim.

Prep work.

First of all, you have to decide on the kind of shower that you want to mount. It is necessary to determine whether the chosen shower can managing specific systems and can manage a secure level of water via the central heating boiler. Many shower units nowadays are designed to be adaptable to different water pressures (such as saved hot water and cool mains).
It is also vital to take into consideration the water pressure and also the planning of the piping and also drain for the shower.

Method.

Relying on the kind of shower you wish to mount, the shower head should either be suited order to avoid its contact with the water in the bathroom listed below or the base tray, or it must have a check shutoff.
Before beginning, it is recommended to note the settings of the shower head and control, as well as to intend the pipe-work included. In addition, the drain system to get rid of the waste water will certainly need to be intended. Both positions of the wire path and also the shower switch will certainly also require to be thought about if a rapid or electric shower unit is being mounted.
Utilize the guideline guide given with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is necessary to cut off the water. In order to protect the pipelines, they should be provided a water-proof covering and likewise fitted with separating valves. The pipelines can after that be buried into the wall surface and glued over to neaten the total look.
Fit the base tray, shower head, as well as installations.
Connect the primary shower control to the pipelines that will be supplying the water (This might call for a female screw thread adapter).
Reconnect the water system and test the pipelines for any kind of leaks, as some may require firm.
If you are installing an electrical shower, keep in mind to turn off the electrical power supply prior to making any kind of electrical connections. When these links have actually been made (there should be assistance within the user's manual), the power supply can be switched over back on.

Readjusting Water Pressure to Suit Your Shower.

The cold water tank can be raised to a better elevation (sometimes as little as 150mm (6inches)) by fitting a strong wood assistance under it - possibly composed of struts and blockboards. If you select this choice, the primary and also circulation pipelines will also have to be raised to satisfy the new height of the tank.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it has to be attached into the power supply in order to run.

Piping and also Water drainage.

It is best to make use of 15mm size supply pipelines, and also make the go to the shower as brief and also straight as feasible so regarding keep optimal stress and also reduce heat loss. Furthermore, by minimising making use of joints for pipeline corners, you can decrease the resistance in the flow of the water supply. You can attain this by flexing the pipes instead.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed reading our piece about How to Install a Direct-to-Stud Shower Enclosure. Thanks for spending some time to read through our post. Do you know about somebody who is fascinated by the niche? Take a moment to promote it. Thank you for your time. Kindly stop by our website back soon.

Book Inspection

Report this page